MIDIAR Cold Glue Cola Fria

• MIDIAR cold glue Cola Fria for dent removal

• 50g glue in metal tin

MIDIAR Cola Fria is a cold glue. This means the glue does not need to be heated to use. Special metal adapters are required to use the cold glue.

Usage note:

In order to achieve the optimal effect of the cold glue, the adapters should be degreased before applying the cold glue. Examples of suitable products for this are silicone remover, alcohol or brake cleaner.

It is also recommended to heat the degreased metal adapter with a dryer before applying the cold glue. This allows the glue to stick better after it has cooled. 

If it comes into contact with water, the cold glue cannot develop its full function. It is therefore important to ensure that the glue or the panel to be processed does not come into contact with water.

If the cold glue nevertheless becomes a little moist, it can be made ready for use again by kneading it carefully.

Important: Neither the metal adapters nor a degreaser are part of the scope of delivery.

Durability:

The durability of the cold glue depends on how clean and degreased the areas to be processed are.

In addition, the durability of the cold glue naturally also depends on the frequency of use. 

If the cold glue is used carefully, i.e. only on clean or always degreased areas, the adhesive can be used for up to a year.

If the glue is not used permanently during this period, it can also be used for well over a year. 

If the cold glue is dirty, for example because it has fallen on the floor, the dirt should first be shaken off well.

If this is not enough to completely clean the glue, the dirty part of the adhesive must be separated from the main mass and disposed of.

The clean main mass can then continue to be used.